Post-Construction Window Cleaning
in Dacula, GA
New build or renovation? Construction crews don't clean windows. We remove paint splatter, sticker residue, caulk, drywall dust, and protective film so your new glass looks the way it should.
You just finished building a new home, added a room, remodeled your kitchen, or completed a major renovation. Everything looks great - the floors are in, the paint is done, the cabinets are installed. But then you look at the windows. They're covered in a film of fine dust. There are paint splatters on the glass. Sticker residue from manufacturer labels is baked on by the sun. Caulk smears, drywall dust, and maybe even concrete splatter are scattered across multiple panes. The windows look like they were an afterthought, and that's because for most construction crews, they are.
At Kidd's ProWash, we handle post-construction window cleaning for new builds and renovations all across Dacula and Gwinnett County. With all the new development happening around Hamilton Mill, Buford, Lawrenceville, and throughout the area, we see this all the time. Construction crews focus on the structure, the finishes, and the big-picture items. They don't clean the windows because that's not their job. It's ours. And we have the right tools and techniques to get construction debris off your glass safely, without scratching or damaging the new windows.
What Construction Leaves on Your Windows
Construction is messy work, and every phase of a building or renovation project leaves something on the glass. Here's what we typically find on windows after construction is done:
Paint Splatter
Painters tape the glass, but paint still flings tiny dots from brush strokes and rollers. Micro-splatters and missed tape spots leave paint on the glass.
Sticker & Label Residue
Manufacturer labels, energy stickers, and brand decals sit in Georgia sun for weeks. Heat bakes the adhesive into the glass, leaving stubborn gummy residue.
Drywall Dust
Fine, chalky dust from hanging and sanding drywall settles everywhere - inside every window, in the tracks, on the sills, and as a white film on the glass.
Caulk & Sealant Smears
Sealing around window frames and trim leaves residue on glass. Silicone caulk is especially stubborn once it cures and bonds to the surface.
Concrete & Stucco Splatter
Pouring foundations, laying brick, and applying stucco create splash that lands on nearby glass. These alkaline materials can etch glass if left too long.
Protective Film
Sometimes left on new windows intentionally during construction but forgotten at project wrap-up. Sun-baked adhesive bonds to the glass, making removal difficult.
Why You Can't Just Wipe It Off
The reason post-construction window cleaning is a specialty service is that these aren't regular dirt and dust. Paint, caulk, adhesive, and mineral splatter are bonded to the glass surface. Wiping them with a cloth just smears them around. Using a razor blade incorrectly can scratch the glass. Using the wrong chemical on the wrong type of debris can damage the glass coating or the window frame.
We use specialized scraping tools with the right blade angle and technique to remove paint and stickers without scratching. We use solvents that dissolve adhesive residue without harming the glass or frame material. And we know the difference between tempered glass and annealed glass - which matters because tempered glass is more prone to scratching during scraping if it has manufacturing defects on the surface.
Chase grew up around construction sites. His background in the trades means he understands what materials are on the glass and the best way to remove each one. That knowledge translates to cleaner windows and zero damage - which is what you want when you've just invested in a new build or big renovation.
Our Post-Construction Cleaning Process
Every window gets inspected individually. Not every pane needs the same treatment - we customize our approach based on what we find.
Full Window Inspection
We note what type of debris is on each pane - paint, stickers, caulk, dust, or a combination - so we use the right approach for each one.
Paint Removal
Professional window scrapers with fresh razor blades, held at the correct angle, shave off paint dots without digging into the glass. We wet the glass first with lubricating solution so the blade glides smoothly.
Sticker & Adhesive Removal
We apply a solvent that softens the adhesive bond without affecting the glass or frame. After letting it sit, the residue comes off cleanly. We always test in a small area first.
Drywall Dust Removal
We start with a dry wipe to remove loose dust - wetting drywall dust turns it into a smearing paste. Then we do a thorough wet cleaning with professional glass cleaner.
Caulk & Sealant Treatment
Each caulk type - silicone, latex, polyurethane - responds to different products. We soften the caulk, scrape it off, and clean the area completely.
Tracks, Sills & Final Squeegee
We clean the tracks and sills packed with construction dust, then squeegee every window to a streak-free finish. New windows should slide smoothly and seal properly.
New Construction Around Dacula
Gwinnett County has been growing fast for years, and the area around Dacula is right in the middle of it. New subdivisions are going up off Hamilton Mill Road, along Harbins Road, and throughout Buford, Lawrenceville, and Auburn. Every one of those new homes needs post-construction window cleaning before the homeowner moves in.
We work with builders, general contractors, and homeowners directly. Some builders hire us as part of their punch list - the final checklist of tasks before turning the home over to the buyer. Other times, the new homeowner realizes after move-in that the windows are a mess and calls us to clean them up. Either way, we handle the job and leave every window in the house looking brand new.
Commercial buildouts are just as common around here. New restaurants opening in shopping centers, retail spaces getting remodeled, office buildouts for growing businesses - they all leave construction residue on the windows. Our storefront window cleaning service handles the ongoing maintenance, but the initial post-construction cleaning is a different level of work that requires specialized tools.
Renovation Projects Need This Too
Any renovation involving these creates debris on your windows
Contractors focus on the walls and trim. They tape the glass if you're lucky, but they don't clean it when they're done. That's something we hear from homeowners all across Suwanee, Duluth, Grayson, and Snellville - the renovation looks great, but the windows are a mess.
Pairing Post-Construction Cleaning with Other Services
If you're moving into a new build, the whole house probably needs attention. Adding screen cleaning to the post-construction window cleaning makes sense because screens on new builds collect construction dust too. And our hard water stain removal service handles any mineral deposits from construction water or rain runoff that dried on the glass during the build process.
For larger properties, pairing window cleaning with an exterior wash of the concrete, siding, and other surfaces gives you a completely clean home from day one.
Moving into a new build? Bundle post-construction window cleaning with screen cleaning and an exterior wash to start with a completely clean home from day one.
Frequently Asked Questions
It depends on the number of windows, the types of debris on them, and the severity of the buildup. New builds with lots of paint splatter and sticker residue take more time than a simple renovation with mostly drywall dust. We give free quotes after inspecting the windows so you know exactly what to expect.
Yes. We use professional-grade scrapers with fresh blades, proper lubrication, and the correct angle to remove paint without scratching the glass. We're experienced with both tempered and annealed glass and know how to handle each type safely.
Before, if possible. It's easier for us to work in an empty house without furniture and belongings in the way. But we can absolutely do it after you've moved in - we just work more carefully around your things.
Some do, some don't. A lot of builders in Gwinnett County include a basic cleaning in their punch list, but it's often a quick wipe-down rather than a thorough post-construction cleaning. If your windows still have paint spots, sticker residue, or dust after the builder's cleaning, we can handle the detailed work.
For a typical new home in Dacula with twenty to thirty windows, it usually takes three to five hours depending on the amount of debris. Larger homes or homes with heavier construction residue take longer. We give you a time estimate along with the quote.
Get a Free Post-Construction Window Cleaning Quote
If you've just finished a build or renovation and your windows are covered in construction residue, don't try to scrub it off yourself - you could scratch the glass. Kidd's ProWash has the right tools, the right products, and five years of experience handling post-construction cleanup across Dacula and Gwinnett County. Chase built this company on people over profits, and that means we treat your brand-new glass with the care it deserves.
Reach out to us for a free, no-obligation quote. We serve Dacula, Lawrenceville, Buford, Auburn, Grayson, Suwanee, Duluth, and Snellville. Check out all of our window cleaning services to see what else we can take care of while we're at your property. Let's get those new windows looking perfect.
Ready to See the Difference?
Get a free, no-obligation quote from Kidd's ProWash. We serve Dacula, Lawrenceville, Buford, Auburn, Grayson, and all of Gwinnett County.